Before assembly – Kenmore 146.1613311 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
BEFORE ASSEMBLY
Step 2: With the aid of an assistant, turn grill head over on its side os shown in the first figure below, and
remove the top styrofoam piece. Lay the styrofoam piece flat on the floor. With the aid of on assistant,
lift the grill head out of the bottom styrofoam piece. Place the grill upright on the other styrofoam piece
as shown in the second figure below.
CAUTION: DO NOT place the grill head directly on the floor or the grease tray could become bent.
14 • 16132-40200104
Advertising
This manual is related to the following products: