Kenmore ASPIRADORA 116.34728 - Manual (Page 22)

TROUBLESHOOTING
Review this table to find do-it-yourself solutions for minor performance problems. Any other
service needed, should be performed by a Sears or other qualified service agent.
A
\A^RNING:
Disconnect electrical supply before performing maintenance to the
unit. Failure to do so could result in electrical shock or personal
injury.
Vacuum Cleaner
won’t run.
‘ Л1 \ j'j/■ ;
1. Unplugged at wall outlet
2. Tripped circuit breaker/blown fuse
at household service panel.
3. OtVOff switch not set to On position
4. Thermal protector tripped.
1. Plug in firmly, push OiVOff switch to On.
2. Reset circuit breaker or replace
fuse.
3. Push On/Off switch to On position.
4. Unplug vacuum cleaner, allow to cool
and thermal protector will reset itself.
Poor job of dirt
pick-up.
1. Full or clogged dust bin.
2. Wrong pile height setting.
3. Worn agitator
4. Clogged nozzle.
5. Clogged hose.
6. Hole in hose.
7. Hose not inserted fully
8. Motor protection system activated.
9. Dirty filters.
1. Empty dust bin.
2. Adjust setting.
3. Take to your nearest Sears
Service Center.
4. Check CLOG REMOVAL.
5. Check for clogs.
6. Take to your nearest Sears
Service Center.
7. Check hose connection
8. Check for clogs.
9. Change primary filter and
exhuast filter.
Vacuum Cleaner picks up
moveable rugs or
pushes too hard.
1. Wrong pile height setting. 1. Adjust setting.
Light won’t work. 1. Burned out light bulb. 1. Change light bulb.
Agitator does not turn. 1. Carpel/Bare floor selector in Bare Floor
2. Broken belt.
1. Move selector to the Carpet position.
2. Replace belt.
Air flow restricted
with attachment use.
Sound changes.
1. Attachment use restricts air flow.
2. New carpet fuzz clogged air path.
1. Check ATTACHMENTS.
2. Check CLOG REMOVAL and clean
hose.___________________________
Dirt Sensor, some
models, will not work.
1. Dirty optic cells. 1. Clean optic cells.
22