Kenmore 87133 - Manual (Page 9)

OPERAHON INSTRUCTIONS
SICHALS DJRING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Over does nol accept Ihe entry, clieck and try agadn.
S etting the clock
1. Tcucti CLOCK pad.
2. Use the number pads to enter the correct
tlriH. You must Couch at teast №ree numbefs
to set the clocR(orte for hour and two for
minutes).
J- Touch CLOCK pad again.
КОТЕ:
■ Thns is a 12 hour clocfc. When the even is first
plugged in or when power resumes after a power
interruption, the display will show ENTER CLOCK
TIME. Ifyoupoefertonothave the cbOk displayed,
touch RESET.
■ You can check the dock time while cooking is in
progress by touching Che CLOCK pad.
S etting the ovea timer
3,
Touch TIMER.
Enter the amount of lime by touching the
number pads. Digit lime le In minutes and
seconds and set left to right Set one digit (a
5 for 5 seconds) or up lo four digits (2405 for
24 minutes, 5 seconds).
Touch START/STOP.
NOTE:
• Time counldGwn can be seen In display for 3
seconds before dock or cooking time Is relumed
lo display.
-ToLtch TIMER and then touch RESET to cancel
TIMER during timing process.
S etting a cooking program
A One-stage Cooking
1, Use fhe number pads to set a cooking tinie.
You can set a cooking time from one seconds
lo 99 minutes and 99 seconds.
2, If you want to set a power Eevel other than
100% power, touch POWER, then
3, USB the number pads to enter Ihe power level.
You can set Ihe power level from 1 to 9.
4, Touch START/STOP to start cooking.
Use sin^ digits to set a cooking power level;
Number pad Cooking power
9 9€%
В Sim
7 70%
6 60%
5 50%
4 40%
S 30%
2 20%
1 10%
B. TVro^ge Cooking
Some recipes require different stages of
cooking at iifferent lempepatunes.
1. SET STAGE 1:
Follow steps 1 and 2 in 'One-stsge Cooking'. DO
NOT TOUCH STARTiSTOP
Z,
SET STAGE 2:
Touch COOK ttien enter proper cooking time and
(Icwer^ power level. (Most 2-slage recipes use
Icwer power for second stage.)
3. Touch START/STOP.
NOTE:
- Afler total lime has elapsed, A signals sound and
END eppears in display. Touch RESET or open