Kenmore 116.36932 - Manual (Page 21)

AniTATnR Cl FANINfi
I B I I \ iw n t K p I • ,
To maintain efficient cleaning, the agitator
must be kept free of carpet fiber, string, or
hair build-up. After every 7 to 10 uses,
unplug and turn vacuum cleaner over and
check agitator for fiber and hair build-up.
Use scissors to remove any build-up entan­
gled around the agitator.
CLOG REMOVAL
Always follow all safety precautions when per­
forming maintenance to the vacuum cleaner.
A
r rfV % U
EBI
0
>OU
06 j
y . y±2 2 “ '§
" »@t@ ^ ^ Vi> -I »
® ¿Vk 14» »@0^ - ± V i t - ±
y i « 14®- <c , ±’4J ±®
“ »® ¿ ^ 1 |<i^ 1 » ^ ¿ y ^ c « ^
V 2 »¿* '§ - ’ 6
If the vacuum cleaner does not seem to have
adequate suction, first check if the dust bin is
full or if a filter is clogged. See DUST BIN
CLEANING and FILTER REPLACEIWENT.
if the dust bin and fitter areas are free of
clogs, check the extension hose. Rotate the
extension hose release lever counterclock­
wise to release extension hose.
Remove the lower end of the extension hose
from the wand holder by grasping the hose
collar, twisting, and pulling straight up.
Plug in the vacuum cleaner and turn it on.
Stretch the extension hose to maximum
length and then allow the hose to return to its
natural length.
Origimi
Hos0
Storage
Position
Extension
Hose
Hose-
Coilar
Re-insert the hose into the opening on the
body from which it was removed. Press firmly
to assure connection. Rotate hose release
iever clockwise to the locked position.
If the dust bin and filter areas and the hose
areas are free of dogs, disconnect the noz­
zle hose from the wand holder and check the
nozzle for clogging.
A
WARNING
Persona! Injury Hazard
DO NOT place hands or feet underneath
the vacuum cleaner at any time.
Clean the agitator according to the instruc­
tions in the AGITATOR CLEANING section.
Return the vacuum cleaner to the upright
position before plugging into an electrical
outlet
I !