Ice' serwlce – Kenmore 25374184403 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Ice' Serwlce':

If your refrigerator has an automatic ice maker, it will provide a sufficient

supply of ice for normal use. During the initial startup of your refrigerator,

however, no ice will be produced during the first 24 hours of operation.

Automatic ice makers are also optional accessories that may be installed in

most models at any time. Call your local dealer for information.

TURNING YOUR ICE MAKER ON

After the plumbing connections have been completed, the water supply valve

must be opened. Place the ice container under the ice maker, pushing it as

far back as possible. Lower the wire signal arm to its “down” or ON position.

New plumbing connections may cause the first production of ice cubes to be

discolored or have an odd flavor. These first cubes should be discarded until
the cubes produced are free of discoloration and taste.

TURNING YOUR ICE MAKER OFF

To stop the ice maker, lift the wire signal arm until it clicks and locks in the

“up” or OFF position. The ice maker also turns off automatically when the ice

container is full. If your model has an adjustable freezer shelf, place the shelf

in the lower position, so that the wire signal arm will hit the ice when the

container is full.

IMPORTANT: Yo.ur ice.ma.keris shipped with ihe..wire.signal arm jn the ON position.To'ensure proper function of

your ice maker.'hook'upwatersupply.immediately-orturn ice. maker OFF.by lifting the wire signal arm until it clicks

-and locks.in the UP position.

Ice Maker

i^CAUTION

. Chemicals from a malfunctioning .softener.'can damage the ice ,m.aker.. If the

ice

maker is'

. connected lo soft water, ensure that the. softener is maintained and working properly. '. . . . . . . . . . .

ICE MAKER TIPS

Ice cubes stored too long may develop an odd flavor. Empty the ice container and ensure that the wire signal arm is
in its “down” or ON position. The ice maker will then produce more ice.

® Occasionally shake the ice container to keep ice separated.

*

Keep the wire signal arm in its “up” or OFF position until the refrigerator is connected to the water supply or whenever

the water supply is turned off.

® The following sounds are normal when the ice maker is operating:

Motor running

Ice loosening from tray

Ice dropping into ice container

® Running water

Water valve opening or closing

.NOTE: For more in.formation on these..gperations, see

Normal Operating Sounds.and Sights

section on page 17.

ikCAUTION

D

.0

.'Not,place the ice.container in your dishwasher.

m

■P“:-

(0:

Wash the ice container in warm water with mild detergent. Rinse well and dry.

Stop the ice maker when cleaning the freezer and during vacations.

If the ice maker will be turned off for a long period of time, turn the water supply valve to the closed position.

15

Advertising