Threading of top thread, Threading-top thread – Kenmore 1250 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Section I
Page 8
THREADING OF TOP THREAD
F i g 3
2.
Place thread on spool pin as shown,
with the thread coming from the back
of the spool (Fig. 1-©). Draw thread
through the top thread guide(s) (Fig.
1 - @ o r
® ) .
Holding the spool with the right hand,
pull the thread through the tension
discs. The spring wire loop should be
pulled up until the thread passes
beyond the beak of the hook. Fig. 2.
5.
After the thread has slipped into the
hook, allow the spring wire to return to
position by releasing the thread spool.
Fig. 3.
Continue threading through the front
thread guide, hook thread into take up
lever and down through path shown in
Fig. 4 and 5.
Always thread needle in direction as
shown in Fig, 5.