Timed dry cycle, Automatic perm press cycle, Automatic regular cycle – FRIGIDAIRE FSEC/FSGC747GE User Manual

Page 2: Cycle selection, Energy saving tips

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

DRY TEMPERATURE

PERM

PRESS

MEDIUM HEAT

KNITS/DEUCATES

LOW HEAT

CYCLE SIGNAL

QUIET

2 - WAYTUMBLE ACTION DRYING

LOUD

TURN TO START

ON

AUTOMATIC

|„c

I I A P

LESS

DOWN

REGULAR

dry

MORE

DRY

PRESS SAVER

AUTOMATIC

PERM PRESS

TIMED

DRY

START

Cycle Selection

Turn cycle selector clockwise to desired cycle and setting.

Each cycle ends with a cool down period. The heat

automaticallyturns offand the load continues to tumble

for 5-10 minutes. This reduces wrinkling and makes

items easier to handle during unloading.

Drying time varies depending on load size, dampness of

load and

fabric type. Room temperature and humidity,

type of installation and electrical voltage or gas pressure

can also affect drying time.

Timed Dry Cycle

This cycle provides up to 70 minutes of drying time at

the temperature selection of your choice.

Automatic Perm Press Cycle

This cycle is best for permanent press, knit and delicate

items. Drying time is determined automatically at the

temperature selection of your choice.

• Medium heat is suggested for permanent press items.

• Low heat is suggested for knit and delicate items.

• If the dried load cannot be removed promptly, the

cycle selector will advance to the

PRESS SAVER

setting.

• Unheated tumbling continues during

PRESS SAVER

for 40 minutes to help reduce wrinkling.

• When the Cycle Signal is on, it will sound briefly every

5 minutes as a reminder to remove the load.

Automatic Regular Cycle

This cycle is best for cotton items that can be tumble

dried.

Drying

time

is

determined

automatically

at

the

temperature selection of your choice. This cycle is best

for items of similar fabric, weight and construction.

• For items requiring more drying time, set cycle selector

on

MORE DRY.

• For items requiring less drying time, set cycle selector

on

LESS DRY.

Energy Saving Tips

Keep the lint screen clean and exhaust the dryer

correctly.

• Sort laundry properly and select proper temperature

and cycle settings. Choose an automatic dry cycle

whenever possible for accurate drying time.

Dry only full loads. Single items and small loads

usually take longer to dry.

• Avoid overloading, adding wet items to a partially

dry load, and overdrying.

• Dry one load after another to take advantage of a

warm dryer.

Opening the door needlessly causes warm air to

escape, which prolongs drying time.

• If possible, use the dryer on low humidity days.

Install the dryer in an area where the room

temperature is at least 45°F (7°C).

P/N 131633100 (9609)

Advertising
This manual is related to the following products: