To set or change the temperature for baking, To set the controls for normal baking, To set control for oven lockout (some models) – Kenmore 790.4019 User Manual
Page 10: Setting oven controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Oven Controls
Note: The time of day must first be set
in order to operate the oven.
fi.
To Set or Change the Temperature
for
Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F
(77°C
to 288°C).
To Set the Controls for Normal Baking:
1. Press --------------------°" appears in the display.
2. Within 5 seconds, press the yv or The display will show "350°F (177°C)." By pressing and holding or -v',
the temperature can then be adjusted in 5°F increments (1°C if the control is set to display Celsius).
3. 10 seconds after the yv
or
pad is released, the oven will begin heating to the selected temperature. When the
displayed temperature reaches the desired baking temperature, the preheat indicator light will turn OFF.
4. To cancel the baking function, press
To Change the Oven Temperature after Baking has Started:
Press the yv
or
-v pad to increase or decrease the set temperature.
To Set Control
for
Continuous Bake or 12 Hour Energy Saving:
The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more
than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
To set control for continuous baking:
1. Press and hold down for 7 seconds until tone is heard.
2. Within
5
seconds, press the
yv
or
-v
pad to switch between Continuous Bake and 12 Hour Energy Saving mode.
The display will show e i t h e r - hr" or "12hr" .
If- hr" appears, the oven will be set to continuous baking. If "12hr" appears, the oven is set to 12 hour energy
saving mode.
3. Wait 5 seconds or press
to return to normal operating mode.
To Set Control for Oven Lockout (some models):
The control can be programmed to lock the oven door (some models) and/or lock the oven control pads (all models).
To Set Control for Oven Lockout feature:
1. Press (^p) and hold for 3 seconds. The "Door Locked" indicator light will glow and the motor driven door lock will
begin to close automatically. DO NOT open oven door while the indicator light is flashing. Allow about 15 seconds
for the oven door to lock. Once the oven door is locked, "Loc" will appear in display.
2. To cancel the Oven Lockout feature, press i
resume normal operation.
and hold for 3 seconds. The control will unlock the oven door and
10