Kenmore 44823 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TO REPLACE WATER FILTER:

ADJUSTABLE DOOR BINS

It is not necessary to turn the water supply off to change the

filter. Push the filter release button, located to the right of the

filter cartridge, to release the filter from the housing. To minimize

the possibility of the filter falling out of the housing during

removal, it would be best to hold the filter as it moves out

toward you.

NOTE:

A small amount of water may be released

during this operation. You should have a paper towel or dish

cloth handy to wipe out any water that may drip out of the filter

or housing. Two small holes near the back of the housing have

been added for any excess water to escape. It would be best to

clear away any food near this area on the top shelf in advance

of removing the filter.

Puli the old filter cartridge straight out ot the housing and discard

it.

Then follow the instructions above tor installing a water filter.

Order new filter cartridges through the dealer where you bought

the refrigerator, or contact the Sears Parts Direct at 1 -800-366-

PART. It might be good to order some filter cartridges when you

first install your refrigerator. Be sure to ask for Kenmore

replacement cartridge 469916.

The PureSource2™ Water Filter System NGFC 2000

with the PureSource2™ cartridge FC 100 is tested

and certified by NSF International, the nationally

recognized and respected, not for profit, certification

organization for public health safety.

The PureSource2™ Filter System is tested and certified to ANSI/

NSF Standards 42 and 53. See performance data sheets for

specifications. This system should not be used on water that is

microbiologically unsafe or with water of unknown quality unless

the water has been adequately disinfected before or after

traveling through the filtration system.

♦ Rated Capacity:

400 gallons

• Rated Service Flow:

.5 GPM

♦ Maximum Rated Pressure:

100 PS I

• Maximum Operating Temperature:

lOO^F

This mode! is equipped with adjustable door bins that can be

moved to suit individual needs.

TO MOVE DOOR

BINS:

Lift the bin straight up.

Remove the bin.

Place the bin in desired

position.

Lower the bin onto

supports until locked in

place.

FULL WIDTH GALLON BIN

The full width gallon bin is especially designed to hold gallon­

sized containers like milk gallons.

TALL BOTTLE RETAINER

I

BIN SNUGGER

The tall bottle retainer keeps all containers in the bin from falling

forward when opening or closing the refrigerator door. To install,

hold the retainer or snugger at the top, and slide it over the

outside wall of the bin.

"Z-

"&■

■I™:.

Tall Bottle Retainer (left) and Bin Snugger (right)

WINE RACK

DOOR MOUNTED

TEMPERATURE GAUGE

The

door

mounted

temperature

gauge displays the cabinet internal

temperature.

The wine rack stores bottles of wine, or single two-liter plastic

bottles of juice or soda pop. The wine rack fits conveniently in the

gourmet pantry (lower crisper).

Advertising