Cycle options, E note, V note – Kenmore 417.8413 User Manual
Page 10: Operating instructions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Appropriate Options will automatically be displayed for each
cycle. The number of options selected will be displayed numeri
cally on the
button. Options can be added or deleted
before the cycle is started.
To adjust options, press the
button to navigate to the
options screen. To add options, press the corresponding options
buttons. Selected options will be highlighted. To delete options,
press the corresponding options buttons again.
To protect your fabrics, not all options are available with every
cycle. If an option is not available with a particular cycle, it is
faded out. Occasionally, options in the same cycle will conflict
with each other, such as
When this hap
pens, the option selected first will cause the conflicting option to
not be selectable. After you have made the desired adjustments,
button to return to the home screen or ►
to begin the cycle.
To change the options after the cycle starts, press H!
then press the
button. Adjust the settings and
to resume the cycle.
if the dried load might not be
removed promptly at the end of the cycle. The dry
load will continue tumbling without heat to help reduce
is selected, a beep will be heard
periodically. The load may be removed any time during
option to protect a load from exces
sive heat which can lead to shrinking and over-drying.
The drying temperature will be gradually reduced as the
option injects steam into the clothing
prior to cool down to reduce wrinkling.
Steam may not necessarily be visible inside drum
It is not recommended to use fabric softener sheets
as it may cause staining
Damp Dry Signal
For loads that contain some items you plan to hang dry,
flat dry or iron, add the
Damp Dry Signal
option to any
Auto Dry cycle. If the
is turned up, a chime will
sound when the load has reached the
level to remind you to remove those items to hang dry,
dry flat or iron dry. Open the door, remove those items,
close the door and press the
button to continue
drying the remaining items.
This setting (no heat) can only be used with a
cycle to dry items containing feathers, down, foam rub
ber, plastics or rubber-like materials; to refresh clothing,
stuffed animal, pillows or blankets; and to dust draperies.