Changing oven temperature display, Setting silent or audible control mode, Setting oven lockout – Kenmore 790.9280 User Manual

Page 17: Changing oven temperature display (f° or c°)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Setting Oven Controls

Changing oven temperature display

The oven control is preset to display °F (Fahrenheit) when

shipped from the factory. The control can be changed to

display either Fahrenheit or Celsius.

Example; to change the temperature to display °C

(Celsius) or °F (Fahrenheit):

1. Press and hold

Broil

key pad for 6 seconds.

2. Press

Flex Clean

key pad to toggle between Fahrenheit

or Celsius temperature display modes (Figs. 1 & 2).

3. Press START to accept choice.

Important note:

The oven temperature display cannot be modified if Bake

or Flex Clean is active.

I

Fig. 1

Fig. 2

Setting silent or audible control mode

Silent mode allows the oven control to operate without

audible tones. The control may be programmed for silent

operation and later returned to operating with all the

normal audible tones.

Example; to

set

for silent or audible mode:

1. Press and hold

Delay Start

key pad for 6 seconds.

2. Press

Flex Clean

key pad to toggle between beep ON

(Fig. 3) or beep OFF (Fig. 4).

3. Press START to accept choice.

Setting Oven Lockout

^

The control may be programmed to lock the

oven door and lock the oven control key pads.

OVEN

LOCKOUT

To activate the oven lockout feature:

1. Be sure oven door is completely closed.

2. Press and hold

stop

for 3 seconds.

DOOR LOCKED

(See

Fig. 5) will appear in the display. The motor driven door

latch mechanism will begin locking the oven door

automatically. Do not open the oven door. Allow about

15 seconds for the oven door to completely lock. Once

the oven door is locked, the

Loc

will appear in the

display (See Fig. 6).

I

Fig. 5

LOC

Fig. 6

u

Fig. 3

Fig. 4

To cancel the oven lockout feature:

1. Press and hold

stop

for 3 seconds. The motor driven

door latch mechanism will begin unlocking the oven

door automatically. Do not open the oven door. Allow

about 15 seconds for the oven door to completely

unlock.

2. When the

Loc

and

DOOR LOCKED

messages no longer

display, the oven door may be opened and the oven

control key pads will be available for use.

Important notes:

To avoid possible damage to the oven door latching

mechanism,

do not

attempt to open or close the oven

door whenever the

DOOR LOCKED

message is flashing.

• If a control key pad is pressed when OVEN LOCKOUT is

active, the control may triple beep indicating the key

pad action is not available when the OVEN LOCKOUT

feature is active.

17

Advertising
This manual is related to the following products: