Kenmore 183.134013 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

FIRST STEPS

CLEANING

This Owner’s Guide provides specific operating
instructions for your model. Use the freezer oniy as
instructed in this Owner’s Guide. Before starting the
freezer, follow these important first steps.

INSTALLATION

• Choose a place that is near a grounded electricai outlet.

Do Not use an extension cord or an adapter piug.

• For the most efficient operation, the freezer shouid be

iocated where surrounding temperatures will not exceed
100'F (37.7'C). Temperatures below 32T (O'C) will affect

freezer operation. Additional compressor heaters are not

recommended. This freezer is not recommended for use
in locations that will fall below 32T.

Allow space around the unit for good air circulation.

Leave a 4 inch (102 mm) space on all sides of the

freezer for adequate circulation.

NOTE; The exterior walls of the freezer may become quite

warm as the compressor works to transfer heat from the
inside. Temperatures as much as 30T warmer than room
temperature can be expected. For this reason it is
particularly important in hotter climates to allow enough
space for air circulation around your freezer.

NOTE: If the freezer has been placed on its side or in a

tilted position for any period of time, wait 24 hours before

plugging it in.

' Wash any removable parts, the freezer interior, and

exterior with mild detergent and warm water. Wipe dry.

Do not use harsh cleaners on these surfaces.

‘ Do not use razor blades or other sharp instruments,

which can scratch the appliance surface when removing
adhesive labels. Any glue left from the tape can be

removed with a mixture of warm water and mild

detergent, or touch the residue with the sticky side of
tape already removed. Do not remove the serial plate.

ENERGY SAVING TIPS

• The freezer should be located in the coolest area of the

room, away from heat producing appliances or heating

ducts, and out of direct sunlight.

• Let hot foods cool to room temperature before placing in

the freezer. Overloading the freezer forces the
compressor to run longer. Foods that freeze too slowly
may lose quality or spoil.

• Be sure to wrap foods properly, and wipe containers dry

before placing them in the freezer. This cuts down on

frost build-up inside the freezer.

• Freezer shelves should not be lined with aluminum foil,

wax paper, or paper toweling. Liners interfere with cold
air circulation, making the freezer less efficient.

• Organize and label food to reduce door openings and

extended searches. Remove as many items as needed
at one time, and close the door as soon as possible.

Advertising
This manual is related to the following products: