Kenmore 3828FI2852V - Manual (Page 6)

USE AND CARE
HOW YOUR VACUUM WORKS
The vacuum cleaner creates suction that
picks up dirt. Rapidly moving air carries
the dirt to the dust bin through the air flow
passages. The dust bin lets the air pass
through, while it traps the dirt. For best
cleaning results, keep the airflow passage
open. Check the starred areas
occasionally for clogs. Unplug from outlet
before checking.
HOW TO START YOUR VACUUM
A
WARNING
Personal Injury and Product Damage Hazard!
• DO NOT plug in If switch is in ON position.
Personal injury or product damage could result.
• The cord moves rapidly when rewinding.
Keep children away and provide a clear path when
rewinding the cord to prevent personal injury.
■ DO NOT use outlets above counters. Damage to
items in surrounding area could occur.
1. Pull out the power cord to the desired length.
When you unwind the cord, you will see a
yellow and a red mark. The red mark is at the
very end of the cord, the yellow mark is 28
inches from the cord end.
NOTE: To reduce the r-sk o- elecrric shock, this
vacuum cleaner has a polarized plug; one blade is
wider than the other. This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If It still does not fit, contact a
qualified electrician to install the proper outlet. Do not
change the plug in any way.
2. Plug the polarized power cord into a 120 Volt
outlet located near the floor.
To rewind; Unplug the cleaner. Hold the plug
while rewinding to prevent damage or injury
from the moving cord. Press on the cord reel
button to rewind the cord.
3. To start, press power
switch. To stop,
press power
switch again.
Power Switch Knob
-6-