Suggested pile height settings, Attachments on handle, Note – Kenmore 116.27514 User Manual
Page 11: Attachments on wands, Attachment, Usetable, Caution, Attachments
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SUGGESTED PILE HEIGHT SETTINGS
For best deep down cleaning, use the XLO
setting,, However, you may need to raise the
height to make some jobs easier, such as
scatter rugs and some deep pile carpets,
and to prevent the vacuum cleaner from
shutting off. Suggested settings are:
HI - Shag, deep pile, or scatter rugs,
MED ~ Medium to deep pile.
LO “ Low to medium pile,
XLO ~ Most carpets and bare floors.
ATTACHMENTS
A
CAUTION
DO NOT attach or remove handle or
wands while vacuum cleaner is ON.
This couid cause sparking and damage
the electrical contacts.
ATTACHMENTS ON HANDLE
NOTE: If the
PowerMate is
attached, turn
vacuum cleaner
off before
removing handie
from wands,
1, Press handle
quick release
button and pull
up on handie
Handle
Lack
Button
Handle
Quick
Release
Upper
Wand
2.
Slide attachments firmly
on handie as needed. See
ATTACHMENT USE
TABLE.
NOTE:
To assemble
dusting brush
Insert the fabric
brush into the
dusting brush
nozzle and press
into place.
Dusting
Brush
Fabric
Brush
To remove,
press latch
and lift out
Latch
ATTACHMENTS ON WANDS
1.To
remove
wands from
PowerMate,
lock wands
in straight-
up position.
Wand
Quick
Release
Pedal
2. Press wand quick
release pedal with foot
and pull the wands
straight up and out of
PowerMate.
The PowerMate plug
and cord do not have
to be removed to use
attachments on the
wands.
3. Put attach
ments on
wands as need
ed. See
ATTACHMENT
USETABLE-
11