Troubleshooting guide – Kenmore 25344133802 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TROUBLESHOOTING GUIDE

PROBLEM

CAUSE

CORRECTION

SOUND AND NOISE (Coni)

Bubbling or gurgling sound,

* Refrigerant (used to cool freezer is

circulating throughout the system.

* This is normal.

Vibrating or rattling noise.

* Freezer is not level. It rocks on the

floor when it is moved slightly.

* Level the freezer. Refer to "LEVELING" in the "FIRST

STEPS" section.

* Floor is uneven or weak.

* Ensure floor can adequately support freezer. Level

the freezer by putting wood or metal shims under part

of the freezer.

* Freezer is touching the wall.

* Re-level freezer or move freezer slightly. Refer to

"LEVELING" in the "FIRST STEPS" section.

WATER / MOISTURE/ FROST INSIDE FREEZER

Moisture forms on inside

freezer walls.

* Weather is hot and humid, which

increases internal rate of frost build­

up.

* This is normal.

* Door is slightly open.

* See "DOOR PROBLEMS".

* Door is kept open too long or is

opened too frequently.

* Open the door less often.

WATER / MOISTURE/FROST OUTSIDE FREEZER

Moisture forms on outside

freezer walls.

* Door may not be seating properly,

causing the cold air from inside the

freezer to meet warm moist air from

outside.

* See DOOR PROBLEMS .

ODOR IN FREEZER

Odors in freezer.

* Interior needs to be cleaned.

* Clean interior with sponge, warm water, and baking

soda. Replace air filter.

* Foods with strong odors are in the

freezer.

* Cover the food tightly.

DOOR PROBLEMS

Door will not close.

* Freezer is not level. It rocks on the

floor when it is moved slightly.

* This condition can force the cabinet out of square and

misalign the door. Refer to "LEVELING" in the

"FIRST STEPS" section.

* Floor Is uneven or weak.

* Ensure floor can adequately support freezer. Level

the freezer by putting wood or metal shims under part

of the freezer.

LIGHTING PROBLEMS

Light bulb is not on.

* The fluorescent lamp or light buib is

burned out.

* Foilow directions under "INTERIOR LIGHTING" or

"MID LEVEL LIGHTING" in the "FREEZER

FEATURES" section.

* No electric current is reaching the

freezer.

* See FREEZER DOES NOT RUN .

AUTOMATIC ICE MAKER

Automatic ice maker not

working.

* Ice maker is not working.

* Ensure the wire signal arm Is not in the UP position

* Water supply is turned off.

* Water pressure is too low.

* The freezer is not cold enough.

■■X'

o

:z

12

Advertising
This manual is related to the following products: