Venting instructions – Kenmore 305 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

VENTING INSTRUCTIONS

Ref

Description

US Installations

A

Clearance above grade, veranda, porch, deck, or balcony

12 inches (30 cm)

B

Clearance to window or door that may be opened

12 inches (30 cm)

C

Clearance to permanently closed window

*

D

Vertical clearance to yentilated soffit, located aboye the terminal within a
horizontal distance of 2 feet (61 cm) from the center line of the terminal

*

E

Clearance to unyentilated soffit

*

F

Clearance to outside corner

*

G

Clearance to inside corner

*

H

Clearance to each side of center line extended aboye meter/regulator
assembly

*

I

Clearance to seryice regulator yent outlet

*

J

Clearance to nonmechanical air supply inlet to building or the combustion air
inlet to any other appliance

12 inches (30 cm)

K

Clearance to a mechanical air supply inlet

3 feet (91 cm) above if within

10 feet (3 m) horizontally

L

Clearance aboye payed sidewalk or payed driveway located on public property ®

*

M

Clearance under veranda, porch, deck, or balcony @

*

© A vent shall not terminate directly above a sidewalk or paved driveway that is located between two single family dwellings and serves

both dwellings.

© Permitted only if veranda, porch, deck, or balcony is fully open on a minimum of two sides beneath the floor.

* For clearances not specified in ANSI Z223.1/NFPA 54 or CSA B149.1, clearances are in accordance with local installation codes and the

requirements of the gas supplier.

18

305 & 505 Outdoor Manual

Advertising