Looking inside – Kenmore 2533184010C User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Looking inside

A CAUTION

To avoid personal injury or property damage, handle

tempered glass shelves carefully. Shelves may break suddenly if
nicked, scratched, or exposed to sudden temperature change.

SHELFADJUSTMENT

Refrigerator shelves are easily adjusted to suit individual needs. Before
adjusting the shelves, remove all food.

To adjust sliding shelves:

O Remove shelf by pulling forward to stop position.

^ Lift front edge up and puli out.

Replace the shelf on any pair of rails by reversing this procedure.

To adjust cantilever shelves:

NOTE:

Cantilever shelves are supported

Cantilever shelves are available in either

back of the

glass or wire.

C/)

o

z

LU

O Lift front edge up.

Q

Pull shelf out.

Replace the shelf by inserting the hooks at rear of the shelf into the wail
bracket. Lower the shelf into the desired slots and lock into position.

SpillProof^glass

shelves (some models) catch and hold accidental spills. In

some models, the

SpillProof*^

shelves slide out for easy access to food and

for fast cleaning. The shelves slide out independently of the cantilever

brackets. Just pull the front of the shelf forward. The shelf can be extended
as far as the stopper will allow but it is not removable from the cantilever
bracket.

refrigerator.

Sliding Glass Shelf

Full Width Cantilever Glass Shelf

Cantilever Glass Shelf - Fixed and Sliding

12

Advertising
This manual is related to the following products: