Exhaust filter changing, Warning, Exhaust filter – Kenmore 116.25513 User Manual
Page 15: Hepa
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EXHAUST FILTER CHANGING
A
WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged
exhaust rilter or without the exhaust
filter or exhaust filter cover installed.
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be
replaced when dirty. Replace the filter when
the entire surface area is covered evenly.
The filter CANNOT be washed as it will
lose its dust trapping ability.
NOTE: See PARTS AND FEATURES for
exhaust filter number.
1. Pull out and
up on the
exhaust filter
cover to remove
from the vacuum
cleaner and lay
aside.
Exhaust
Fitter
2. Pull the exhaust
filter up and out
from the rear of
the vacuum
cleaner.
3. Replace the
exhaust filter
cartridge.
Place the new
filter into the
vacuum cleaner
with the foam
seal facing
towards the vacuum cleaner.
Exhaust
Filter
Tabs
4. Replace the
exhaust filter
cover by placing
the two tabs on
the filter cover
into the slots on
the vacuum
cleaner and
rotate into place
until it snaps
closed.
15