Exhaust filter changing, A warning, Power-mate® care – Kenmore ASPIRADORA 116.25914 User Manual
Page 17: Power-mate* care, Exhaust filter hepa
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EXHAUST FILTER CHANGING
A WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged exhaust
fiiter or without the exhaust filter or
exhaust filter cover installed.
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be
replaced when dirty. Replace the filter when
the entire surface area is covered evenly.
The filter CANNOT be washed as it will
lose its dust trapping ability.
NOTE:
See
PARTS AND FEATURES
for
exhaust filter number.
1. Slide latch
upward to
release the
exhaust filter
cover from slot
in canister.
2. Pull out and
up on filter cover
to remove from
canister.
3. Remove the
exhaust filter
using the recess
as shown.
E xh aust
Filter
5. Replace the
exhaust filter
cover by placing
the two tabs on
the filter cover
into the slots on
the canister and
rotate into place.
4. Replace the
exhaust filter
cartridge.
Place the new I
filter into the :
canister with |
the
foam seal
I
towards the
I
canister.
I
6. Slide latch
downward to
lock the exhaust
fiiter cover into
place.
POWER-MATE® CARE
Always follow all safety precautions when
cleaning and servicing the Power-Mate®.
A WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before ser
vicing or cleaning the unit. Failure to do
so could result in electrical shock or
personal Injury from cleaner suddenly
starting.
17