To set control for oven lockout, Setting oven controls (cont’d) – Kenmore 790.3693 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

To Set or Change the Temperature for Baking

The oven can be programmed to bake at any temperature from 170°F to 550°F

(77°C

to

287°C).

To Set

the

Controls for Baking:

1. Press Bake. “---------- °” appears in the display.

Within 5 seconds, press the or The display will show “350°F (1

77°C)”.

By pressing and holding the.^4. or

Л/", the temperature can then be adjusted in

5°F

increments

(1°C

if the control is set to display Celsius).

As soon as the or N/" pad is released, the oven will begin heating to the selected temperature. When the oven
temperature reaches the desired baking temperature, the preheat indicator light will turn OFF and the control will beep
3 times.

Setting Oven Controls (cont’d)

2

.

3.

4. To cancel baking, press

To Change the Oven Temperature after Baking has Started:

1

. Press

Bake

and make sure the bake temperature is displayed.

2. Press the ,/\. or N/' pad to increase or decrease the set temperature.

To Set Control

for

Continuous Bake or 12 Hour Energy Saving

The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more
than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.

To set control for continuous baking:

Timer

Press and hold Set/Off down for 5 seconds until tone is heard, “-------hr” will appear in display for continuous

cooking. The current time of day will return to the display.

Timer

To cancel the Continuous Bake function, press

Set/Off

and hold for 5 seconds until tone is heard. “12hr” will appear in

display indicating that the control has returned to the 12 Hour Energy Saving feature.

1

.

2

.

To Set Control for Oven Lockout

The control can be programmed to lock the oven door and lockout the oven control pads.

To set Control for Oven Lockout feature:

1

.

2

.

Press and hold for 3 seconds. “Loc” will appear in display, the “Door Locked” indicator light will flash and the

motor driven door lock will begin to close automatically. DO NOT open oven door while the indicator light is flashing.

Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear in
the display.

To cancel the Oven Lockout feature, press (^

stop

) and hold for 3 seconds. The control will unlock the oven door and

resume normal operation.

Note: While in the Oven Lockout mode when the BAKE, BROIL, WARM & HOLD, COOKTIME, DELAY START and
SELECT CLEAN pads are pressed, “Loc” will appear in the display until the control pad is released. The OVEN
LIGHT, CLOCK and TIMER pads will still operate.

14

Advertising