Agitator servicing, Warning, To check agitator assembly – Kenmore 116.22813 User Manual
Page 19: To replace agitator assembly, Agitator assembly, Agitator servicing agitator assembly
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AGITATOR SERVICING
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec
trical shock or personal injury from
cleaner suddenly starling.
TO CHECK AGITATOR
ASSEMBLY
When brushes
are worn to the
level of the base
support bars,
replace the
agitator
assembly.
TO REPLACE AGITATOR
ASSEMBLY
w
I
m
IWI LJr b» 1
1. Remove Power-Mate® cover, agitator
cover, belt and agitator assembly. See
To Remove Beif in BELT CHANGING
AND AGITATOR CLEANING.
2. Remove end caps, washers, screws,
end brush, and brush sprocket pieces
from ends of old agitator assembly
3. Reassemble agitator assembly. To line
up screw holes in dowel, sprocket and
end brush, be sure ail of the brush
sprocket pieces align properly. See
AGITATOR ASSEMBLY.
4. Reinstall bell, agitator assembly,
agitator cover and Power-Mate® cover.
See To Replace Beit" in BELT
CHANGING AND AGITATOR CLEANING.
.r.
•¡ir
AGITATOR ASSEMBLY
End
Brush
End
19