Kenmore 790.7116 - Manual (Page 8)

Noie:.Thetimeofday m.ustfirst beset in.crder to operate the
oven.: ^ ^ -.....:... :... :... :... :... :... :... :...:... :... :...
To Set the Clock
When the range is first piugged in, or when the power
suppiy to the range has been interrupted, the display wili
flash "12:00".
1. Press
2. Within 5 seconds, press and hold the yv or\/ until
the correct time of day appears in the display.
To Set the Minute Timer:
1. Press (S).
Setting Oven Controls
2. Press the y\ to increase the time in one minute
increments. Press and hold the y\ to increase the
time in 10 minute increments. The timer can be set for
any amount of time from 1 minute to 11 hours and 59
minutes.
Note: If you press the \y first, the timer will advance to
11 hours and 59 minutes.
3. The display shows the timer count down in minutes
until one minute remains. Then the display will count
down in seconds.
4. When the set time has run out, the timer will sound a 3
second beep. 0:00 will appear in the display until
is pressed.
Note: While the minute timer is counting down, the will
flash. The minute timer does not start or stop cooking. It
serves as an extra timer in the kitchen that will beep when
the set time has run out. The minute timer can be used
alone or during any of the other oven functions. When the
minute timer is in use with any other function, the minute
timer will be shown in the display. To view other functions,
press the pad for that function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press
and hold the or to increase or decrease the time.
To Cancel the Minute Timer before the set time has
run out: Press
Changing the Temperature Display Mode
(some models)
The electronic oven control temperature display mode was
factory preset to display(Fahrenheit) °F oven tempertaures.
Note: Oven cooking temperatures may be set from 170°F to
500T(77“Cto260X).
1
To change the Temperature Display Mode to °C
(Celsius) or from °C to °F (do not use Bake or Broil while
changing the Temperature Display Mode):
Press & hold the key pad for 6-8 seconds until For
C appears in the display. Note: At this time the display
will show the current Temperature Display Mode
whether set for For C.
Press the y\ key pad once to choose the (Fahrenheit)
°F mode; or press the \y key pad once to choose the
(Celsius) °C mode.
After 5 seconds, the display will flash. To accept the
change, wait 5 more seconds until the oven control
beeps once. To complete the change skip step 4 below,
OR;
If at any time during the process of changing the
Temperature Display Mode (For C ) you decide the
change is not desired, press the © key pad before
the oven control beeps once to cancel the process.
The control will beep once. The display will then return
to the time of day with any temperature display mode
change you may have requested.
To Set or Change the Temperature for Baking
The oven can be programmed to bake at any temperature
from170Tto 500T.
1
.
2
.
To Set the Controls for Baking:
Press . "------------appears in the display.
Within 5 seconds, press the y\ or . The display
will show "350°F." By pressing and holding the or
■s/ , the temperature can then be adjusted in 5°F
increments.
3. When the y\ or is released, the oven will begin
heating to the selected temperature. When the
displayed temperature reaches the desired baking
temperature, the control will beep one (1 ) time.
4. To cancel the baking function, press (^p) .
To Change the Oven Temperature after Baking has
Started:
1. Press and make sure the bake temperature is
displayed.
2. Press the or \/ to increase or decrease the set
temperature.