Pile height selection and setting, Some models, On/off switch – Kenmore ASPIRADORA 116.34722 User Manual
Page 6: Releasing the handle, Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PILE HEIGHT SELECTION AND SETTING
SOME MODELS
To select a pile height setting:
Turn off cleaner. Select a pile height setting
by tilting the cleaner back until front wheels
are lifted slightly off the floor as illustrated.
Slide the adjustment lever to the correct
setting.
Models with no selector adjust automatically
for varying carpet heights.
SUGGESTED PILE HEIGHT SETTINGS
You may need to raise the height to make
some jobs easier, such as scatter rugs and
longer pile carpets.
Suggested settings are:
HIGH: shag carpet, long pile, plush, scatter
rugs
MED: medium to long pile.
LOW: short to medium pile.
EX LOW: very low pile.
Place unit in “HiGH” when using attach
ments to prevent possible floor damage.
ATTENTION: Special care is required when
vacuuming certain types of carpet or floor
covering. Always check the carpet or floor
covering manufacturer’s recommended
cleaning instructions before vacuuming.
Pile Height
Adjustment
Lever
A
WARNING
Personal Injury Hazard
To avoid personal injury, DO NOT
place hands or feet underneath the
unit when changing height setting.
ON/OFF SWITCH
Ensure ON-OFF switch is OFF. Plug the
power cord into 120V outlet. ON position
turns vacuum on. OFF position turns
vacuum off.
RELEASING THE HANDLE
Release the handle by pressing down on
the handle release pedal with your foot and
pulling back and down on the handle with
your hand.