Dispenser light (on some modeis), Refrigerator controi panei light, Crisper lights – Kenmore WIOI67097A User Manual

Page 17: Upper freezer light (on some modeis), Styie 1, Styie 2, Lower freezer light (on some modeis), Styie 1 - beneath ice bin, Styie 2 - behind freezer basket

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Dispenser Light (on some modeis)

Reach through the dispenser area to remove and replace
light bulb.

"■A

A. Dispenser light

NOTE: On some models, the dispenser lights are LEDs that can
not be changed.

Refrigerator Controi Panei Light

Reach behind the refrigerator control panel to remove and
replace light bulb.

Crisper Lights

If necessary, remove the top crisper drawer to access the

crisper light shield. Remove the light shield by lifting the ends
out of the brackets as shown.

Replace the light shield by inserting the ends into the
brackets. If necessary replace the top crisper drawer.

Upper Freezer Light (on some modeis)

Styie 1
■ Remove light shield by grasping the top center of the shield

and pulling forward whiie turning it siightly to one side. If

necessary, remove top crisper drawer to gain access to the

crisper light shield.

■ Replace the light shield by inserting the tabs on one end into

the slotted holes in the refrigerator or freezer liner. Then, bend
the shield at the center to insert the tabs on the other end.

Styie 2
■ Remove the light shield by squeezing the sides of the light

shield in toward the center while pulling the shield forward as
shown.

Replace the light shield by fitting the tabs into the slotted
holes in the freezer liner. Push in the shield until it snaps into
place.

Lower Freezer Light (on some modeis)

Styie 1 - Beneath ice Bin
■ Remove the light shield by grasping the sides and squeezing

in toward the center. Once the side hooks of shield are free

from the freezer lining, pull down the shield.

■ Replace the light shield by squeezing the sides toward the

center and inserting the side hooks into the slotted holes.
Once the side hooks are in place, snap the front tab into the
slotted hole.

Styie 2 - Behind Freezer Basket
■ Depending on your model, remove the top freezer basket or

top freezer basket shelf. Remove light shield by removing the

Phillips screw on the top of the shield. Gently rotate the shield
until the left tab can be pulled from the freezer wall.

■ Replace the light shield by inserting the left tab into the

freezer wall. Align top tab with screw hole and replace screw.

If the power will be out for 24 hours or less, keep the door or
doors closed (depending on your model) to help food stay cold
and frozen.
If the power will be out for more than 24 hours, do one of the

following;
■ Remove all frozen food and store it in a frozen food locker.

■ Place 2 lbs (907 g) of dry ice in the freezer for every cubic foot

(28 L) of freezer space. This will keep the food frozen for 2 to
4 days.

■ If neither a food locker nor dry ice is available, consume or

can perishable food at once.

REMEMBER: A full freezer stays cold longer than a partially filled
one. A freezer full of meat stays cold longer than a freezer full of
baked goods. If you see that food contains ice crystals, it may be
refrozen, although the quality and flavor may be affected. If the
condition of the food is poor, dispose of it.

17

Advertising