Kenmore 596.50003100 - Manual (Page 6)

How to Remove the Doors and Hinges
Some instailations require door removal to get refrigerator to finai location.
Installing Your Refrigerator
Remove toe grille and
M- i M. i.i -i.A \0 CjC. J V C bl X- O a
• Open both doors 180°, or as
wide as possible, to remove
) Unscrew uaioa nut
I to detach water tube,
(dispensing modds oaly)
J?pfTimri* f/iD hfnp’f* hv
removing Phillips screw.
4„
Close doors. Unscrew hex
bead screws bom top binges.
DO NOT remove either green ground
wire or wire connecting center screw
■ ■•A.... JrCC I, ¿S i .1../ i Ji.S. ¿Ji V a ji ^ .A.i. i.rM. J -A -A-A.
• Use a fiat blade screwdriver
or fingernail to press junction
point betvreen two connectors
to release.
Detach red wire harness.
• Press tab on underside of
connector to release.
Remove top binges along
with doors.
Remove bottom hinges with s
Y„" hex bead driver.
How to Replace the Doors
To replace doors, follow the steps itt How to
Remove the Doors and Hinges in reverse order
D
How to Install and Remove Handles
installing Front-Mounted Handles
If installing handles for the first time, the fresh food handles can be located within the fr esh food section. The handle trim will
be located in the literature pack
r ..................
1 Remove iw o bes nut
screws bom bottom of
rebigerator and beezer
door.
3 Insert screws removed in st^ 1
into screw boles at bottom of
HyjfiWj/a rifi
Align door bandies with top
and bottom sets of door dips,
and slide down until screw
b.oles on bottom of bandies
match with door screw bales.
4 bottom portion
T— ^
* ot bandies and retainers on
bottom of door.
V ........................