Kenmore 4908 - Manual (Page 7)

Recommended installation spacing for recessed or closet
installation, with stacked washer and dryer
The dimensions shown are for the recommended spacing.
t
48ln.>‘
(310cin<)
3" (7.6 cm)
A
A
0
t
J l
A 3" (7.6 cm)
T
24 in.*’
(155 cm*)
A ^
■<- 1" (2.5 cm)
(13.3 am) (25 cm)
(es.ecm)
(2.5 cm)
' Min. top and bottom air openings for cioset door.
'* Externai exhaust eibow requires additionai space.
'** Waii, door and fioor moiding may require additionai spacing.
Recommended installation spacing for cabinet installation
■ The dimensions shown are for the recommended spacing.
■ For cabinet instaiiation, with a door, the minimum ventiiation
openings in the top are required.
;7"(17.acm)
(22.9 cm)
The washer can be instaiied using the standpipe drain system
(fioor or waii), the iaundry tub drain system, or the fioor drain
system. Seiect the drain hose instaiiation method you need. See
“Toois and Parts.”
Standpipe drain system - wall or floor (views A&B)
The standpipe drain requires a minimum diameter standpipe of
2" (5 cm). The minimum carry-away capacity can be no iess than
17 gai. (64 L) per minute.
The top of the standpipe must be at ieast 30" (76.2 cm) high and
no higher than 96" (2.4 m) from the bottom of the washer.
•9
If
Laundry tub drain system (view A)
The iaundry tub needs a minimum 20 gai. (76 L) capacity. The
top of the iaundry tub must be at ieast 30" (76.2 cm) above the
fioor.
Floor drain system (view B)
The fioor drain system requires a siphon break that may be
purchased separateiy. See “Toois and Parts.”
The siphon break must be a minimum of 28" (71 cm) from the
bottom of the washer. Additionai hoses might be needed.
(10.2 cm) (»1.1 cm) (2.5 cm) (2.5 cm) (6».6cm) (2.5 cm)