Parts & repair services, Pfillell – Kenmore SF22-804 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Date: 12/28/07
Parts & Repair Services
SF22-804
Page 5 of 6
11. Use the wire nut connector provided to
connect the power wire that was attached to
the 170° thermostat to the #1 wire from the
“C” terminal of the new switch.
12.
Install the #2 (318052585 - Red) wire
from the “NC” terminal of the new switch to
the open tenninal of the 170° thermostat that
the power wire previously attached to.
■PFillell
___________
"NC" terminai of
new switch
13. Disconnect the wire from the fan to
the 170° thermostat. Connect this
wire to the piggyback terminai on the
#3 (318052585 - Red) wire. Connect
these two wires onto the open
terminal of the 170° thermostat.
14. Connect the other end of the red #3
wire to the resistor. Connect the #4
(318052586-Brown) wire to one
terminal of the 120° thermostat.
Connect the other end to the
resistor.
IB
' " 91
Confidential Information -For Internal Use Only
DEPARTMENT 702HSX - Leo Steinys
DEPARTMENT 702PSO - Bob Vondale