Converting to free-arm sewing – Kenmore 1660 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
CONVERTING TO FREE-ARM SEWING
Fig. 1
Fig. 2
Remove the base from the machine
by pushing the release button (if
applicable) and pulling the base to
the left, (Fig. 1, 2)
2, To replace the base, simply slide it
along the free arm to its original
position. (Fig. 1)
Note: Base cannot be removed or
replaced unless shuttle cover is
closed.
Advertising