Bottom shelf to legs – Kenmore 415.161278 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Bottom Shelf to Legs
I.: Place bottom shelf end with cut out hole for IP cylinder between legs with axle holes. Attach to right and left leg assemblies with
(4) 1/4-20x1-1/2" screws and
1/4-20
flange
nuts.
: Tighten securely.
_
-
1/4-20 Flange Nuts
Qty:4
7
1/4-20x1-1/2" Screws
Qty:4
14
*464310808 *464310608
Advertising