Grill lighting instruction, Warning, Lighting instructions – Kenmore 122.1643101 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Checking for LP gas leaks

Never test for leaks with a flame. Prior to first use, at

the beginning of each season, or every time your LP

gas tank is changed, you must check for gas leaks.

1. Make a 50/50 (soap/water) mild soap solution.

2. Turn the control knobs to full OFF position; then

turn gas ON at supply tank.

3. Apply the soap solution with a clean brush to all

gas connections. See below. If growing bubbles

appear in the solution the connections are not

properly sealed. Check each fitting and tighten or

repair as necessary.

Gas Connection Leak Check

4. If you have a gas connection leak you cannot

repair, turn gas OFF at supply tank, disconnect

fuel line from your grill and call 1-800-913-8999 or

your gas supplier for repair assistance.

5. Also apply soapy solution to the tank seams. See

below. If growing bubbles appear, shut tank OFF

and do not use or move it! Contact an LP gas

supplier or your fire department for assistance.

Gas Tank Leak Check

3.

4.

5.

6

.

7.

8

.

Be sure all gas connections are securely

tightened.

Open the Gas Grill Lid.

Push and turn any main burner knob to HI

position. Push Electronic ignition button for 3

to 5 seconds to light burner. Adjust knob to

desired setting.

If the burner does not light after 5 seconds,

turn knob to OFF. Turn gas OFF at LP tank

and wait 5 minutes for gas to clear. Then

turn gas ON at tank and repeat step 5

If burner still does not light, see Match

Lighting section and If Grill Still Fails to Light

section on following page.

To light additional burners, turn burner

knob(s) to

^

HI. Push electronic ignition

button for 3 to 5 seconds to light burner.

Adjust knob(s) to desired setting.

Grill Lighting Instruction

Grill Lighting Instructions for Main Burners

1. Do not smoke while lighting grill or checking gas

supply connections.

2. Be sure that LP gas tank is sufficiently full.

A

WARNING

Failure to open grill lid during the lighting
procedure could result in a fire or explosion

that could cause serious bodily injury, death,
or property damage.

16

Advertising