Setting oven controls (confd) – Kenmore 790.46268 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Oven Controls (confd)
Note: The time of day must first be set in order to operate the oven.
To Set or Change the Temperature for Baking
The oven can be programmed to bake at any temperature from 170°F to 500°F.
To Set the Controls for Baking:
1. Press "------------------ " appears in the display.
2. Within 5 seconds, press the yv or "V- The display will show "350“". By pressing and holding the y\ or 'V. the
temperature can then be adjusted in 5“F increments.
3. When the
or
is released, the oven will begin heating to the selected temperature. When the oven temperature
reaches the desired baking temperature, the control will beep one (1 ) time.
4. To cancel the baking function, press
To Change the Oven Temperature after Baking has Started:
1. Press and make sure the bake temperature is displayed.
2. Press the
or
to increase or decrease the set temperature.
SYt
ff)
IS
. . . v .
11