Dialing does not work, Enabling/disabling anti-curl check sheet (acs), Fax machine does not answer when called – Brother Fax-170 User Manual
Page 66: No dial tone on the handset, Poor transmitting quality, Vertical black lines when receiving
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
El
C H A P T E l i T E N
Dialing Does Not Work
Check for a dial tone.
Change TONE/PULSE setting (see “Fax Settings”).
Check all line cord connections, and make sure the curled handset cord is not in
the EXT jack.
Check power cord connection.
Send a manual fax (press |Hook| or lift handset), and wait to hear fax receiving
tones before pressing (^.
Enabling/Disabling Anti-Curl Check Sheet (ACS)
Although the factory setting of Anti-Curl Check Sheet feature is OFF, you can
check the status of your fax machine’s Anti-Curl (ACS) feature by printing an
Anti-Curl Check Sheet.
Press Q] and [j] at the same time to print an ACS Check Sheet.
Press Q] and [U at the same time to discontinue printing ACS Check Sheet,
Fax Machine Does Not Answer When Called
Make sure the fax machine is not in MANUAL mode.
Make sure it is in the correct receiving mode for your setup (either FAX ONU, F/T
or TAD). Check for dial tone. If possible, call your fax machine to hear if it chirps.
No Dial Tone on the Handset
Press
[Hook).
If you hear no dial tone, check telephone line cord connections at the
fax machine and wall j ack. x''
Poor Transmitting Quality
Try changing your resolution to FINE or SUPERFINE (see “Sending Faxes”).
Try cleaning the white pressure bar of the scanner and the glass under the bar
(seep.
56
).
Vertical Black Lines When Receiving
The sender’s scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine.