Selection of input source, Standby – Cilo C-102 User Manual
Page 15
1
O p e r a t i o n
a n d
f u n c t i o n s
Press the STANDBY key of the remote control to switch to standby mode.
The display is switched off and all functions are reduced to a minimum.
Thus the power consumption of the receiver is reduced to a minimum. In
standby mode the receiver only responds to the STANDBY key of the
remote control.
Consider the environment and switch off the unit after use.
Selection of input source
Switch on the AV receiver and the television set, if desired.
Select the corresponding audio/video input on the television set.
Now you can call the currently active input source. Select tuner to listen to the
radio, AUX 1 or AUX 2 if an analogue device has been connected, or Optical or
Coaxial in connection with a digital signal from a DVD player or a digital satellite
receiver.
Select TV if you wish to hear a television broadcast through the receiver.
Some television sets require a special setting on the television set to ensure correct use of the SCART
channel.
If in doubt, please read the manual provided with your television set.
Standby
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
15
STANDBY
1
DIGITAL DVD/SAT
AUX 1
AUX 2
TUNER
TV
2
MODE
DSP
TUNING
BAND
INPUT
C-102 HOME THEATRE RECEIVER
STANDBY
1
1