How to load the discs, Arning, Loadin^^^is^nt^h^cd^lotj – Pioneer PD-F706 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

HOW TO LOAD THE DISCS

Loading discs into the rack~|i

The rack is for discs No. 1-25.

• You can load up to 25 discs in the rack.

Gentiy iift the handie

to open the hood.

The rack comes out.

Load the disc into the
rack with the iabel

side (printed surface)

facing to the right.

• By using the rack, you

can load a total of 25 discs.

Gently

push

the

handle down to close

the hood.

• CDs cannot be played if

the hood is open.

To remove the discs...

Open the hood when playback has stopped.

Rennove the disc from the rack.

The hood cannot be opened is being played.
The hood cannot be opened for approximately 10 seconds after

playback has finished, or during disc search.

Be careful notto pinch yourfingers when opening and closing the
hood.

Open and close the hood slowly.

If a disc is inserted with its label side facing to the left, it cannot be
played back. Be sure to load all discs with their label sides facing

to the right.

Do not put your hand, or any other objects inside the rack.

A

w

ARNING:

Do not put your hand, or
any other object inside

the rack.

Do not put anything other than CDs inside the rack.
Do not use adapters for 8-cm (3-in.) CDs.
Load only one disc into each disc slot.

Inserting an 8-cm (3-in.) CDs in between two 12-cm (5-in.) CDs,

will make it difficult to remove the 8-cm (3-in.) CD.

We recommend inserting 12-cm (5-in.) CDs starting from the right

side and 8-cm (3-in.) CDs starting from the left side of the rack.

The unit will not operate if the hood is open. Be sure to close the

hood before attempting any operations.

The hood cannot be opened if the rack is currently playing a disc,

during disc search, or during the first 10 seconds after playback

has finished.

If you try to open the hood in one of the previous situations,
" LOCK" will flash in the display. Close the hood immediately and

wait for "LOCK" to go out from the display before opening the

hood.

Playback will stop if you open the hood for longer than 2 seconds

when "LOCK" is flashing.

Be sure to remove all discs from the rack, set the POWER switch

to off (Standby), and unplug the power cord before moving the

unit.

|_Loadin^^^is^nt^h^CD^LOTj|

• The CD SLOT is disc No. 0.
• When the disc in the CD SLOT is played, the play mode is set

automaticaly to SINGLE.

SLOWLY insert the disc

into the CD SLOT with

the label side (printed

surface) facing to the

right.

• When a disc is loaded, the

red indicator at the left of the
CD SLOT lights up.

When a disc is loaded in the CD SLOT while the power of the unit

is in the standby mode, the power is switched on automatically.

A

w

ARNING:

• Do not insert more than one disc

into the CD SLOT.

Do not insert a disc when red

indicators at the left of the CD
SLOT is lit.

To remove the disc...

E J E C T

Note!!

Inserting more than one disc into the CD SLOT will damage the

discs and cause the unit to malfunction.
If you try to insert another disc when one is already loaded,

the currently loaded disc may be ejected and fall from the CD
SLOT.

Do not use a 8 cm CD adapter.
The MODE button is defeated during play of the disc loaded in the

CD SLOT.

When play is impossible because the CD disc is loaded with the

label side facing the left, etc., "PO no dISC?" is displayed and the
disc is ejected automatically.

Press EJECT

± .

1

En

Advertising