Brother MFC-370MC - Manual (Page 38)

liíiiiiliiiiliitiiii
||||i|||j||j|||||
EosiHHjIliltlIlliiiliilliiiliililiii
LKH ssBBiSHSCf
*5
iliiliiii
iillili
íb ";;;;;-
Press I Resolution I (before you send the fax) to select the resolution for the
document you’re sending,
Standard — suitable for most typed documents.
Fine — good for small print; transmits a little slower than standai’d
resolution.
Super Fine — good for small print or artwork; transmite slower than fine
resolution,
Photo — use when document has varying shades of gray; slowest
transmission time.
DO NOT use curled, wrinkled, folded, or ripped paper, or paper with staples
paper clips, paste or tape attached. DO NOT use cardboard, newspaper, or
fabric.
Make sure documents written with ink are completely dn?,
Contrast Setting
If your document is very' light or veiy dark, you might want to set the contrast
accordingly.
Insert the document, face down, in the feeder
Press [Function!, in, i~4l,
W- Use 0] or H to select AUTO, S.LIGHT, or S.DARK,
}:# When the screen displays your selection, press [^.
Press H to exit.
¡6^ Enter a fax number and press to send a fax — OR — Press fC^ to
make a copy.
Manual Transmission
See
One Touch
p. 18
Manual transmission lets you hear the dial tone, ringing, and fax chirps before
sending the fax.
Insert the document face down in the feeder
=2 Pick up the handset and listen for a dial tone — OR — Press iSpenker Phone]
and listen for a dial tone.
3
Enter the fax number you want to call (you can enter the digits using the
keypad, or you can enter a One Touch or Speed Dial number or you can
call from the Tel-Index).