B. call pickup alert, C. callback message – Brother FAX-210 User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
44
B. Call Pickup Alert
This function works when your unit is transmitting to another unit. It is designed to tell the
recipient that you want to talk to him after the completion of the message and before the units are
either automatically or manually disconnected from each other.
For this function to operate, place originals into the feeder. The unit must be placed into the
Temporary Function Mode prior to the initiation of transmission by pressing
FUNCTION.
• Once in Temporary Function Mode, press "9". The LCD will display:
r-MSGCTR
CALL PICKUP:OFF
Select ON or OFF using the cursor keys.
CALL PICKUPrON
AUTO ANS
■PASSWORD
. MSG CTR
AUTO ANS
■PASSWORD
Press
SET
to register this setting.
Press
SET.
Dial and start the fax transmission.
When the fax transmission is completed, the receiver's facsimile will sound as a new
telephone call is being received.
If receiver answers, your unit will also sound as if a new telephone call is being
received. Pick up your handset.
The LCD of the unit will change to:
r- MSG CTR
CALL PICKUP
AUTO ANS
■PASSWORD
You can now start using the unit as a conventionai phone to talk to the receiver.
C. Callback Message
This function is used when there is no response to the Call Pickup request. The CALLBACK
message function is a way of telling the other person that you want to talk to him or her. There are
two distinct ways of sending a callback message:
• Sending it as a completely separate transmission
• Tacking it on to a document that is being transmitted as an additional page.
1. Sending the Callback Message as a separate transmission
• Starting in the standby mode (date and time displayed on the LCD), press
FUNCTION.
• Once in the FUNCTION MODE, press "0". The LCD will display:
MSG CTR
CALL BACK:ON
AUTO ANS
■PASSWORD
Press
SET.
The LCD changes to:
FAX:
l_ MSG CTR
— AUTO ANS
^PASSWORD
Enter the fax number and press
START.
You can enter the fax number using one of
the following:
Manual dial:
press MAN.DIAL button
One-touch dial:
enter 0 to 9
Speed dial:
press #, and enter 01 to 10