Casio CELVIANO AP220ES1C - Manual (Page 31)

English
Assembling the Stand
E-29
3.
Use the two screws I to secure the top left
and right edges of the back panel C to the
brackets 5 of side panels A and B.
• At location 6, slip the clip G onto to the screw I
before installing the screw.
4.
Next, secure the bottom of the back panel C
with the six screws F.
5.
Adjust the height adjustment screw 7 to
provide support so crosspiece D does not
bow downwards when the pedals are
pressed.
IMPORTANT!
• Pressing the pedals without adjusting height
adjustment screw 7 can result in damage to
crosspiece D. Always make sure you adjust height
adjustment screw 7 before operating the pedals.
6.
Place the piano onto the stand.
• At this time the screws on the bottom of the piano 8
should hook into the cutouts in the stand brackets 9.
7.
Use the two butterfly bolts H to secure the
piano to the stand.
IMPORTANT!
• The butterfly bolts keep the piano from slipping off
the stand. Never use the piano without the butterfly
bolts installed.
5
I
I
6
G
C
F
A B
7 D
9
9
9
8
Bracket cutout
Back of piano
Stand side panel
H
AP220_e.book 29 ページ ２００９年５月２７日 水曜日 午後４時３４分