Pioneer GEX-P7000TVP - Manual (Page 19)

Switching the Video Source Only
While continuing to listen to the current audio source, you can set the video source to
“Background Display”, and switch just the video source as desired.
Select the desired picture in the following order:
Each Press changes
the Picture ...
Audio source
“Background Display”
Navigation System video (BGNAVI) TV video (BGTV) VTRl video (BGVTRl)
-► VTR2 video (BGVTR2) Current audio source video (Audio linked mark)
Note:
• If the output audio is TV, channel indications are displayed at the audio source.
• If the Navigation System is not connected, you cannot switch to Navigation System video.
• You can switch VTRl or VTR2 only when “SELECT” is selected in the Setting Menu. (Refer to
page 26.)
• If you switch to just video, audio and video indications are displayed for 8 seconds.
AV MASTER MODE
• Even when a Navigation System is connected, you cannot switch to Navigation System
video (BGNAVI) with this product. Switch with the Audio Visual Master Unit.
• If you switch to “Current audio source video”, “TV” is displayed as the Video source
(Front), and a TV picture unrelated to the audio being output is displayed.
IP-BUS MODE
• When no Navigation System is connected to this product, you cannot switch to
Navigation System video (BGNAVI).
• If you switch to “Current audio source video”, no picture is displayed.
• If reception is interrupted by a traffic or other announcement when using the Head
Unit’s RDS function, the source automatically switches to the tuner. If “Current audio
source video” is selected, no picture is displayed.
ADD-ON MODE
• When no Navigation System is connected to this product, you cannot switch to
Navigation System video (BGNAVI).
• When this product is switched OFF, pressing the V.SEF button selects “Background
Display”.