Telephone & sjm^erahone (voice) curation, Manual dialing, Sjm^erahone – Brother MFC7000FC User Manual
Page 33: Telephone, Voice) curation, Making voice caiis
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C H A P T E R F I V E
Telephone &
SjM^erahone
(voice) Curation
Making Voice Caiis
You can use your Multi-Function Center to make voice telephone calls, by dialing
manually or by using Tel-index or One Touch or Speed Dial memory. You can use
the handset or the Speakerphone to make and receive calls.
The Speakerphone allows you to operate the phone hands free, or allows more
than one person in the room to participate in a two-way phone conversation.
When using the Speakerphone, make sure to speak clearly and close to the
microphone.
Manual Dialing
Manual dialing is simply pressing all of the digits of the phone number.
Pick up the handset—
OR
—Press
[Speaker Phone |.
2 When you hear a dial tone, dial the number, using the keypad.
S You can switch from handset to Speakerphone by pressing
[Speaker Phone
|. then
replacing the handset. You can switch from Speakerphone to handset by
lifting the handset.
H
To hang up, replace the handset—
OR
—Press
[Speoker Phonej.
Answering Calls with the Speakerphone
When the MFC rings, instead of lifting the handset, press
[Speaker Phonej.
Speak
clearly, toward the microphone. To end the call, press
[Speoker Phonej.
If you have a bad telephone line connection, the other party might hear your
voice echoed during the call. Hang up and try the call again—
OR
—Pick up the
handset.