Brother PT-330 - Manual (Page 96)

Error
Message
Cause Remedy
RAM
PROBLEM! • This message appears if
there is a problem with
the
machine's random
access memory.
• Contact your service rep­
resentative.
REPLACE
BATTERIES!
• This message appears
when the installed alka­
line batteries are about to
run out.
• Replace the batteries or
use the AC adaptor.
ROM
PROBLEM!
• This message appears
when there is a problem
with the machine's read
only memory.
• Contact your service rep­
resentative.
SYSTEM
ERROR!
• This message appears if
there is a problem with
the machine's software.
• Contact your service rep­
resentative.
TEXT
TOO HIGH! • This message appears if
the size of the text is
larger than the width of
the installed tape.
• Reduce the size of the
characters or install a tape
of greater width.
TEXT
TOO LONG!
• This message appears if
the length of the text is
longer than the label
length that has been set.
• Delete some of the text,
reduce the character
width or increase the pre­
set label length.
WRONG SELECT • This message appears if
more than five characters
are selected as the num­
bering field.
• Limit the numbering field
to five characters.
93