Honeywell EA79 - Manual (Page 2)

E/^
SPECiFICATIONS • ORDERIN g I n FORMATÌON
Specifications
MATERIALS OF CONSTRUCTION:
Body: Brass.
Cover ring: Brass.
Float, valve lever and cover: Engineered thermoplastics.
Seal disc and rings: Synthetic rubbers.
Fig. 1—EA79 dimensions in in. [mm].
OPERATING RATINGS:
Maximum Pressure; 150 psi
Maximum Temperature; 250° F [120° C]
SAFETY RATINGS:
Maximum Pressure: 450 psi
Maximum Temperature: 250° F [120° C]
CONNECTIONS: 3/4 in. NPT male pipe thread with 1/2 in.
NPT female pipe thread.
DIMENSIONS: Refer to Fig. 1.
CAPACITTES: Refer to Fig. 2.
Fig. 2—EA79 flow capacities, with leakage guard
cap.
NOTE: Capacity indicated is for device with leakage guard
cap correctly installed and operational. Additional capac­
ity may be obtained by removing the leakage guard cap
and installing a connection between the vent discharge
and drain using Q122A1001 Safe Waste Connector.
When purchasing replacemenr and modernization products, specify Ore complete model number.
Ordering Information
1. If you have additional questions, need further information,
or want to comment on our products or services, call;
l-SOO-345-6770, ext. 7188.
Or write;
Honeywell Customer Assistance Center
Honeywell Plaza, MN27-2164, P.O. Box 524
Minneapolis, Minnesota 55440-0524
2. To place an order, contact:
Honeywell Braulanann Customer Service
1985 Douglas Drive North
Minneapolis, Minnesota 55422-3992
(612)542-7106 (Eastern US)
(612) 542-7103 (Western US)
3. Or fax your order to 1-800-356-0149.
INDUSTRIAL AIR VENT:
Description Model Number
Industrial automatic air vent EA79A1004
ACCESSORIES:
Description Part Number
Cover assembly—includes replacement
0 ring, cover and float assembly. P79B1003
Safe waste connector for connecting
top vent to 1/4 in. O.D. tube. Q122A1001
Red vent cap with leakage guard. ^204992