Dimensions/specifications, Bypass valves, Model no. 625.348570 and 625.348590 – Kenmore 625.34859 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 4
OTHER THINGS TO KNOW
4A.
DIMENSIONS/SPECIFICATIONS
FIG. 12
BYPASS VALVES
MODEL NO. 625.348570 AND 625.348590
TIMER SR CODE SR31
NOTE: Please see the rating decal for water softener operating capacity, salt usage and service flow rate/pres-
sure loss performance specifications. Performance specifications are validated by the Water Quality Associa
tion (WQA). The rating decal is located on the rim, under the salt hole cover (see page 28).
WATER SUPPLY TO WATER SOFTENER
MINIMUM WATER SYSTEM FLOW (gpm)
MINIMUM-MAXIMUM WATER PRESSURE (psi)
MAXIMUM WATER TEMPERATURE (°F)
MAXIMUM WATER HARDNESS (gpg)
MAXMUM “CLEAR WATER” IRON (ppm)
SALT FOR WATER SOFTENER
TYPE OF SALT NEEDED
Nu<
ALTERNATE TYPE OF SALT
3
OTHERS
TYPE OF ION EXCHANGE MATERIAL (resin)
High Capacity
20-120
AMOUNT OF RESIN (cu.ft.)
1.0
120
REGENERATION (RECHARGE) CYCLE TIME (min.)
110
FILL
2.7-10.3
7
BRINING/BRINE RINSE
97-106
BACKWASH
7
FAST RINSE
3
st/Pellet
TOTAL REGENERATION TIME ©
109.7-126.3
STORAGE CAPACITY (pounds)
Pure, evaporated, compacted
water softener salt
200
gpm = gallons per minute
psi = pounds per square inch
gpg = grains per gallon
ppm = parts per million
© Does not include CLEAN feature cycle times if set to ON.
19