Setting the auto answer switch, Fax/tel switch – Brother Fax-410M User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
/1A 2.
CONFIGURING THE MACHINE
Setting the auto
answer switch
I---------------------------- j
|-—IM
I AlirnAtJ^
1
mWAL
F/T
AUTOANS
You can select answering mode for fax reception - your choice are
automatically^ manually, or FAX/TEL auto switching.
You can set the unit to answer in-coming calls automatically by
turning on the auto answer feature. To do this, press the
AUTO ANS.
key to light the AUTO ANS LED.
I MANUAL
— m
I
AUTOANS
If you want all calls to be answered manually, press the
AUTO ANS
key to light the MANUAL LED.
I
MANUAL
~m
I
AUTOANS
If you want to select FAX/TEL, Auto changing switch, press the
AUTO ANS.
key, and light both the AUTO ANS. and MANUAL
LEDs.
FAX/TEL switch
--------;
IfiTO/lAiC I
AUTOANS
MANUAL
F/T
AUTOANS
START
The initial setting is "Auto Ans."
The unit is equipped with a switching feature that can distinguish
between
telephone
calls
and
fax
transmissions.
Improving
communications when the machine is used on a single telephone
line. T
0
activate this function on your machine, press the AUTO ANS
key until both LEDs are lit the AUTO ANS and MANUAL LEDs.
If the other party is sending an automatic transmission, the unit
detects the CNG tone and enters fax reception mode automatically.
If the other party is sending a manual transmission or telephone call
the unit rings for a specified period (10 or 20 or 30 seconds which
you can select as the F/T ringing time). Within the F/T ringing time,
if yori pick up the handset, you can talk with the other party. When
the other party wants to send a manual transmission, press the
START key and you will receive the document. If you cannot pick
up the handset within the F/T ringing time, the unit wiU enter FAX
reception mode automatically. So you can receive a document by
manual transmission even if you are away from the machine.
Also, if you have given your F/T & Remote ID number to the other
party they can always send a manual transmission and put your
machine into FAX reception mode by entering the ID number (only
using a tone dial unit),
(see
F/T &.
remote
ID)
IV-1-7