Direct access tuning, Turn the 6 standby/on switch on, Select the desired band with the band button – Pioneer F-208RDS User Manual
Page 9: Press the direct button, To cancel frequency input
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC TUNING OPERATIONS
Direct Access Tuning
When you know the frequency of the desired station, the frequency
can be input directly using the STATION CALL buttons in the
following way.
1. Turn the 6 STANDBY/ON switch ON.
2. Select the desired band with the BAND button.
3. Press the DIRECT button.
4. Input the desired station frequency using the
STATION CALL buttons.
To cancel frequency input
Direct access is canceled when the DIRECT button is pressed again.
Under the following conditions, direct access is canceled and the
unit returns to the condition in effect before direct access was
selected:
0lf there is no key input for approximately five seconds after the
DIRECT button is pressed.
d) If more than approximately five seconds elapse between number
inputs.
NOTES:
9 Always input the frequency to the last digit.
• After performing direct access and inputting the frequency, any
discrepancy is corrected (for example, FM 100.01 MHz FM
100.00 MHz), so the MEMORY button does not immediately
function after the final digit has been input. To memorize a station
frequency, first confirm that "MEMORY” is lit on the display
before pressing the STATION CALL button.