Clarity C410 - Manual (Page 15)

The style of ring or cadence can also be
adjusted by pressing the RING STYLE
button. Six (6) styles are available
allowing you to customize your ring.
The ringer will sound for 2 seconds
while choosing a ringer style, to
allow the user to make a choice.
NOTE: If both handset and base
ringer’s are set to OFF, the visual
ringer will flash to indicate there is
an incoming call.
Visual Ringer
Visual ringers are located in both the
handset antenna and the base of the
telephone. When an incoming call is
received, these lights will flash. The
handset visual ringer will be lit when
the phone is in use.
E
N
G
L
I
S
H
15
POWER
PAGE
IN USE/
CHARGE
RINGER OFF ON RINGER OFF ON
VOLUME VOLUME
RING STYLE RING STYLE
E
N
G
L
I
S
H
BOOST CLARITY POWER
button can
toggle the Clarity Power function on or
off according to the user’s needs.
CAUTION: VOLUME WILL BE LOUD
WHEN BOOST SWITCH IS SET TO ON.
Ringer Controls
Ringers and ringer controls are located
in both the handset and the base of
the C410.
Handset Ringer
Set the switch marked RINGER ON/OFF
located on the side of the handset.
The ringer switch must be set to ON
for the handset to ring signaling an
incoming call.
Base Ringer
The base ringer includes ringer volume
and ring style adjustments located on the
side of the base of the telephone. Adjust
the volume of ring by pressing the
VOLUME UP or DOWN switch until the
desired ring volume is achieved. There
are six (6) levels of volume available.
Operating Your Telephone
RINGER
OF
F
O
N
OF
F
O
N
UG060205_C410_RevA.qxd 6/15/05 8:03 PM Page 15