Kenmore 415.1613911 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Unscrew electronic ignition cap on cart right side panel. Insert AA battery into ignitor, negative(-) end
first. Replace the cap.
Electronic Ignition Cap
LP TANK IS SOLD SEPARATELY. Fill and leak check the tank before attaching to grill and regulator (see
Use & Care section).
Once tank has been filled and checked for leaks, slide tank tray in bottom shelf forward. Fully loosen tank
screw at bottom of tank tray. Insert tank into tray with tank valve facing to right side of cart. Secure tank
by tightening tank tray screw. Connect regulator to tank as described in Use and Care section. Slide tank
shelf back into place.
See Use & Care section of this manual to perform the "Burner Flame Check" and for important safety
instructions before using.
Tank Screw at bottom of tank tray
Always keep LP tank in upright position during use,
transport, and storage.
t
CAUTION
1
LP Tank valve must face to right side of
cart once tank is attached. Failure to
install cylinder correctly may cause gas
hose to be damaged in operation,
resulting in the risk of fire.
•' Tank
*
.(hot includec
464224211 • 19