Cables to Go DOCSIS Cable Modem - Manual (Page 9)

DOCSIS 1.0/ 1.1 Equivalent Cable Modem
Figure 2. Connecting the AC Adapter
Power
Step 3-a:
Connect the Cable Modem to an IEEE 802.3 10BaseT / 802.3u 100Base-TX Network
using a RJ-45 male-terminated CAT-5 cable as illustrated in Figure 3a.
Figure 3a. Connecting to a Network Interface Card
10/100Mbps
Auto-MDIX Ethernet
Step 3-b (optional):
Notice: Some serials may not have USB port.
Connect the USB cable to the Cable Modem by inserting the rectangular end of an
USB cable into the USB port of the Cable Modem as illustrated in Figure 3b. Ensure
the connectors lock together by listening for a snap.
5