Sharp 2020215A0343 - Manual (Page 12)

HOW TO OPERATE
TO CHANGE TEMPERATURE
SETTING: YOU WILL SEE:
Q Comfort TOiKh
o|
o ol o “oan
DO THIS:
(^)
-PRESS TO
RAISE
"PRESS TO
LOWER /rmo
1
/VONEM
ìgool J f onaof ^
#
Note: Tap or hold either up( A ) or down( ^ ) button until
the desired temperature is seen on the display. This tempera­
ture will be automatically maintained anywhere between 60T
(16'C) and 90’F (32’C). If you want the display to read the
actual room temperature. See “To Operate on Fan ” section
on Page 13.
TO ADJUST FAN SPEEDS: YOU WILL SEE:
Q Comfort Touch
DO THIS:
PRESS TO
SELECT:
FASTER
SLOWER
Press the Fan Faster buttonC A) will increase the fan speed
from Low (LO), to Medium (ME), to High (HI). The digital
display will indicate your chosen speed. Press the Fan Slower
button ( 'W ) will decrease the fan speed from High (HI), to
Medium (ME), to Low (LO). The digital display will indicate your
chosen speed. After 5 seconds the display will revert back to the
set temperature.
TO USE AUTO COOL YOU WILL SEE:
LIGHT ON
Note: Fan starts at High Speed and adjusts to a slower speed
as the room temperature dictates. For example if the room
doesn’t get too warm, it will stay at the slowest speed. If the
room temperature rises quickly, such as a door being opened,
it will automatically go to the highest speed. The fan speeds
will re-adjust back to the slowest speed as the room returns to
the original set temperature. Press either the fan slower ( 'W )
or fan faster button ( A ) to adjust the fan speed manually.
12