Cowon Systems CW200 - Manual (Page 14)

CW200
First, switch to Voice Recording Mode and press to start recording. To stop recording, press again.
A voice album (SC4 file) is created. When recording from FM Radio Mode, the recording file (SC4 file) is saved as the last file
in the voice album. So, to listen to the recording file, you must switch to Voice Recording Mode.
Ⅰ
10. Detailed Controls
Do not connect the iAUDIO to the PC without battery.
If ‘Hardware Add/Remove Wizard’ runs, click ‘Cancel’ and pull out the USB cable. Insert battery and
reconnect the USB cable.
Connecting to PC
When USB cable is connected to PC for downloading files onto the iAUDIO, ‘PC Connected’ appears in the LCD window and
mode switches to PC Connection Mode.
While iAUDIO is connected to PC, tracks cannot be played. So, if you want to listen to tracks, you must pull out the PC
connection cable from the iAUDIO.
Low Battery
If battery is weak, the battery display in the LCD window starts to blink, and when battery is completely out, the iAUDIO
automatically turns off.
Hold
While HOLD is ‘ON’, the power cannot be turned on. So, make sure to switch HOLD ‘OFF’
before turning power on.
Switching the HOLD switch ‘ON’ makes buttons inoperative and prevents unwanted action caused by accidental pressing
of buttons.
Voice Recording
While iAUDIO is connected to the PC through the USB cable, the player is supplied power from the PC. Although
there is almost no battery consumption during this time, the battery must still be inserted in the iAUDIO.
One, All, and Ran Repeat Modes may cause the player to keep playing in an infinite loop and run the
battery out. So, be sure to stop or turn off the power of the player when not using.
14