Other viewing options, Presettirtghrematevcoiitroi fuiicti, Presetting manufacturer codes – Sharp AQUOS LC-37GP1U User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Other viewing options
Allows you to capture and freeze a moving Image that
you are watching.
Presettirtghrematevcoiitroi fuiicti
You can operate the connected AV products (AV
Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD)
using the presetting manufacturer function of your
remote control unit.
ft;
''■ÏÏ
^ress FREEZE.
A moving image is captured.
-’ress FREEZE again to cancel the function.
When this function is not available, "No displaying still
image available." will display.
The stiii image automatically goes out after 30 minutes.
If you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
cancelled and a V-CHiP BLOCK message will appear.
Presetting manufacturer codes
■
Press FUNCTION until the LED for your
device lights up.
After the LED for your device lights up, press
FUNCTION and DISPLAY at the same time
to enter the code registration mode. The LED
will blink.
Press 0-9 to enter the manufacturer code. (See
page 50.)
« Preset mode is finished once the LED no longer
lights up.
After registering the code, the LED will stop
blinking then turn off after one second. (If you
perform an incorrect operation, the LED will
' blink quickly then turn off.)
®- 49